Discontinued
FA12ac Self-Powered 12″ Coaxial Loudspeaker
FA12ac Self-Powered 12" Coaxial Loudspeaker
90° x 45° Coverage Pattern
- HF/LF Transducers: Coaxial 3.0” titanium diaphragm compression driver; 12.0” woofer, 3.0” voice coil; single neodymium magnet
- Power Handling at Nominal Impedance:
LF: 53 V / 350 W @ 8 Ω
HF: 31 V / 120 W @ 8 Ω - Equalized Maximum SPL (peak / continuous):
Full Range: 127 dB / 121 dB
80 Hz HPF: 129 dB / 123 dB
The FA12ac is a portable, self-powered coaxial loudspeaker that is well suited for a variety of sound reinforcement applications. Its neodymium coaxial transducer and 90° x 45° horn provide broad coverage that is beneficial in both stage monitor and mains operation. Its multi-faceted enclosure includes a pole mount socket, 40° and 55° rear angles for stage monitor use, and M10 threaded accessory plates for use with optional suspension hardware such as the FA12 Yoke Bracket. The enclosure is horizontally-oriented for a visually pleasing, low profile aesthetic. If a vertical orientation is desired, it can be easily obtained by exchanging the pole socket with one of the M10 accessory plates and rotating the coaxial transducer to provide appropriate coverage angles.
Sound, innovative acoustical design combined with on-board TQ™, Level 1 processing provides exceptional clarity and stability, and precise transient response even at very high sound pressure levels. Four back panel selectable presets optimize the response for either mains or floor monitor use, with or without a subwoofer. A full complement of input filters and delay, as well as signal levels and amplifier status, may be accessed via Ethernet, using Armonía Pro Audio Suite™ control software. In addition, a pre-output EQ stage is available for programming custom presets. These presets may be saved and later recalled using the back panel Preset Select button or software.
The FA12ac’s coaxial transducer is powered by two 1050 watt amplifier channels, designed and manufactured in Italy by Powersoft. Powersoft amplifiers incorporate state-of-the-art Class-D technology to produce extremely high efficiency, low noise, and low intermodulation distortion in compact and lightweight packages.
The FA12ac’s versatility, high performance, and aesthetic appeal make it a compelling choice for A/V rental companies, live performance venues, corporate A/V, nightclub PA, theatrical productions, and more.
Sound, innovative acoustical design combined with on-board TQ™, Level 1 processing provides exceptional clarity and stability, and precise transient response even at very high sound pressure levels. Four back panel selectable presets optimize the response for either mains or floor monitor use, with or without a subwoofer. A full complement of input filters and delay, as well as signal levels and amplifier status, may be accessed via Ethernet, using Armonía Pro Audio Suite™ control software. In addition, a pre-output EQ stage is available for programming custom presets. These presets may be saved and later recalled using the back panel Preset Select button or software.
The FA12ac’s coaxial transducer is powered by two 1050 watt amplifier channels, designed and manufactured in Italy by Powersoft. Powersoft amplifiers incorporate state-of-the-art Class-D technology to produce extremely high efficiency, low noise, and low intermodulation distortion in compact and lightweight packages.
The FA12ac’s versatility, high performance, and aesthetic appeal make it a compelling choice for A/V rental companies, live performance venues, corporate A/V, nightclub PA, theatrical productions, and more.
...or give us a call: (866) 234-0678
